3D Printed AtGames Legends Trackball Supports - Sheldon Sims Shims For Sale
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
3D Printed AtGames Legends Trackball Supports - Sheldon Sims Shims:
$6.00
3D Printed AtGames Legends Trackball Supports - Sheldon Sims Shims
Keep your trackball from breaking in the first place. I designed the trackball shims to fill in the gaps between the roller holders and sides of the trackball case. This stops downward pressure on the trackball from breaking the roller holders.
The shims will work on the following:
V1.0 AtGames Legends Ultimate
V1.1 AtGames Legends Ultimate
AtGames Legends Gamer Pro
Arcade Control Panel for AtGames Legends Pinball
QuadPlay 4-Player Control Panel (with optional trackball)
Colors will vary, and will be based on whatever filament I have on hand.
You can download the PDF installation guide from:
The installation guide is based on the Sam\'s version V1.0 AtGames Legends Ultimate, but the steps are similar for all AtGames Legends products which use the same trackball.
*** Bottom of trackball case is pictured, but not included. You will be receiving 5 trackball supports which can be installed in your trackball case. ***
*** Be sure to push all 5 shims down as far as they will go. Support #5 (the \"U-shaped piece) can be a tight fit. ***
Your fellow Legend,
Sheldon Sims